Next Level Performance
November 14, 2026 β’ 10 min read
The best suspension bushings for the 2015-2021 Subaru WRX & STI replace the soft factory rubber pivots that let your front control arms deflect under load β the hidden reason a healthy VA-chassis car can still feel vague on turn-in, dart under braking, and wander on the highway. Swap the front lower control arm bushings for a stiffer polyurethane or spherical design and the steering sharpens instantly, caster becomes repeatable, and your alignment finally stays where the shop set it. At NLP Performance in Tampa, FL, these are one of the highest-value handling upgrades we sell for the EJ and FA20 cars, usually landing between roughly $210 and $580 depending on how far you want to take it.
Our Verdict
The Whiteline WEK130 Front Essential Vehicle Kit is the best all-around bushing upgrade for the 2015-2021 WRX & STI.
It bundles the front control-arm bushings, a roll-center/bump-steer correction kit, and caster-adding anti-lift geometry in one box β so you fix deflection and dial in alignment in a single install. On a tight budget, the SuperPro DuroBall kit (around $210) sharpens the front end while keeping daily-driver comfort. Track-focused? The Whiteline KCA425M race anti-dive/caster kit is the turn-in specialist.
Shop Our Top Pick βWhy Your WRX or STI Feels Vague β Itβs the Bushings
The weak link on a 2015-2021 WRX and STI is the large, vertically mounted front lower control arm rear bushing. From the factory it is soft rubber, chosen because it is quiet and cheap to mold at volume. The trade-off is deflection: every time you brake hard or load the front end in a corner, that rubber squashes, the control arm moves, and your toe and caster change for a split second. The result is the exact feeling WRX owners describe β a nose that wanders, a steering wheel that goes light and vague on turn-in, and an alignment that never seems to hold.
On 2011-and-newer STI models Subaru increased the diameter of that bushing and never offered an upgraded rubber version, so the aftermarket fix is to replace it with a stiffer material. Polyurethane, synthetic elastomer, or a spherical ball-in-poly design all cut deflection dramatically. Tighten up that single pivot and the car feels like it gained a steering rack: faster response, more feedback, and brake-dive that no longer drags the alignment around with it.
Stiffer front control-arm bushings cut the deflection that makes a stock WRX feel vague.
How We Chose: Material, Alignment, and Daily Comfort
Every kit here is in stock, confirmed to fit the 2015-2021 WRX and STI (the GR/VA STI runs 2011-2021), and chosen on three things that actually matter to a street-and-track Subaru:
- Bushing material. Polyurethane is the popular sweet spot β far stiffer than rubber, still streetable. A DuroBall-style spherical ball bonded into polyurethane removes deflection while keeping articulation, so it is the lowest-NVH upgrade. Full rod-end or monoball parts are stiffest but noisiest.
- Alignment control. Some kits are standard alignment (they restore factory geometry) and some are offset or anti-lift/caster (they add positive caster for sharper turn-in and high-speed stability). Choose based on whether you want stock numbers back or more aggressive geometry.
- Daily comfort. Stiffer bushings transmit more road noise and vibration (NVH). If your WRX is a daily driver, the DuroBall and standard polyurethane options keep it livable; race kits are firmer by design.
Prices in this guide run from around $210 for a single-position budget kit to about $580 for the complete front package. Every option below is under $600, and all of them require a wheel alignment afterward.
The Best Bushing Kits for the 2015-2021 WRX & STI
Best overall. Whitelineβs WEK130 is the complete front-end answer: it combines the front control-arm lower inner front and rear bushings, a rear roll-center/bump-steer correction kit, and Whitelineβs famous anti-lift/caster geometry in one box. That means you kill the main deflection bushing and add positive caster and corrected roll-center in a single install β a genuine handling transformation rather than a band-aid. It is the priciest kit here at $584.10 (down from $755.52), but it replaces what would otherwise be three separate purchases, which is why it is our top pick and the one most WRX owners should buy once.
Key Specifications β Whiteline WEK130
What We Like (Whiteline WEK130)
- + Complete front package β control arm, roll-center, and strut mounts in one kit
- + Adds positive caster and corrects bump-steer for sharper, more stable steering
- + Replaces three separate buys, so it is the best value for a full front refresh
Things to Consider
- β Highest upfront cost of the group at $584.10
- β Longer, press-dependent install β plan on a shop and an alignment
The WEK130 adds positive caster and corrects roll-center, not just deflection.
Best for alignment tuning. Cobbβs CB-4428K targets the exact problem bushing β the front control-arm rear, vertically mounted pivot β replacing it with a synthetic elastomer and bearing assembly. This is the offset version, so it lets your alignment shop add caster for crisper turn-in and better straight-line stability instead of just restoring stock numbers. At $270 it is a focused, high-impact fix for owners who want to dial in geometry without buying a full kit, and it is currently running an extra discount at NLP.
Best budget pick (under $300). SuperProβs DuroBall kit is the smartest entry point at $209.99. The DuroBall design bonds a spherical ball into a polyurethane housing, so it removes the deflection that makes the front end vague while still letting the arm articulate β the lowest-NVH way to firm things up. This is the standard alignment version, which restores factory geometry, making it the ideal choice for a daily-driven 2015-2021 WRX or STI that you want sharper without the harshness of race hardware.
What We Like (SuperPro DuroBall)
- + Lowest price here at $209.99 β the best value entry point
- + DuroBall spherical-in-poly design keeps road noise and harshness low
- + Targets the exact deflection bushing for a big steering improvement
Things to Consider
- β Single-position kit β does not add caster or correct roll-center
- β Standard alignment only, so no aggressive geometry change
SuperProβs DuroBall bonds a spherical ball into polyurethane for low-NVH stiffness.
Best for track and autocross. The Whiteline KCA425M is the turn-in specialist. Its race-durometer bushings add positive caster and reduce the anti-dive geometry change under braking, so the front end stays planted and responsive when you are loading it hard. At $271.51 it is a purpose-built handling part rather than a full refresh β pick it if your WRX or STI sees track days and you want the sharpest possible steering, and accept that race hardware brings more NVH than the DuroBall option.
The race-durometer KCA425M adds caster and resists brake dive for track turn-in.
WRX & STI Bushing Kits Compared
| Kit | Bushing Type | Alignment | Best For | Price |
|---|---|---|---|---|
| Whiteline WEK130 Essential KitTop Pick | Polyurethane, full front kit | +Caster, roll-center | Complete front refresh | $584.10 |
| Cobb Inner Bushing Kit (Offset) | Synthetic elastomer + bearing | Offset (+caster) | Alignment / caster tuning | $270.00 |
| SuperPro DuroBall Kit (Std.) | DuroBall spherical-in-poly | Standard (factory) | Budget, low-NVH daily | $209.99 |
| Whiteline KCA425M Race Kit | Race-durometer poly | +Positive caster | Track / autocross turn-in | $271.51 |
Installation and Alignment: What to Expect
Front control-arm bushing replacement on the 2015-2021 WRX and STI is a press job, not a driveway bolt-on. The old rubber bushings are pressed into the control arm, so most owners have a shop handle it β plan on roughly four hours of labor for the full Whiteline kit, less for a single-position SuperPro or Cobb bushing. A hydraulic press and the correct bushing material (polyurethane bushings get assembly grease; spherical and elastomer parts have their own procedure) make the difference between a clean install and a fight.
The one non-negotiable step: get a wheel alignment afterward. Any bushing change at the control arm moves your caster, camber, and toe, and the offset and anti-lift kits are designed to change caster. Driving on the old alignment will chew tires and hide the handling gains you just paid for. Budget for an alignment the same day, and tell the shop which geometry target you want β stock numbers for a daily, or added caster for a sharper street/track setup. Need the matching arms, sway bars, or endlinks too? Browse our full Subaru suspension collection.
Frequently Asked Questions
Do suspension bushings really make a difference on a WRX or STI?
Yes β upgraded front bushings are one of the most noticeable handling changes you can make to a 2015-2021 WRX or STI. The factory front lower control arm rear bushing is soft rubber that deflects under braking and cornering, causing vague steering, nose wander, and alignment that drifts. Replacing it with polyurethane or a spherical DuroBall bushing sharpens turn-in, adds steering feedback, and keeps your alignment stable, usually for between $210 and $584.
Which bushing causes the vague steering on a 2015-2021 WRX/STI?
The front lower control arm rear bushing β the large, vertically mounted rubber pivot β is the main culprit. It squashes under load and lets the control arm move, changing toe and caster momentarily. Subaru enlarged this bushing on 2011-and-newer STIs and never offered an upgraded rubber version, so a stiffer aftermarket bushing (Cobb, SuperPro, or the Whiteline kit) is the fix.
What is the best bushing upgrade for a 2015-2021 WRX or STI?
The Whiteline WEK130 Front Essential Vehicle Kit is the best all-around choice at $584.10. It bundles the front control-arm bushings, a roll-center/bump-steer correction kit, and anti-lift/caster geometry, so it both removes deflection and improves alignment in one install. For a budget option, the SuperPro DuroBall kit at $209.99 delivers most of the steering improvement with the lowest road noise.
Polyurethane vs. DuroBall (spherical) bushings β which should I choose?
Choose polyurethane for the firmest street-friendly response and DuroBall (a spherical ball bonded into polyurethane) for the lowest noise and vibration. Polyurethane is stiffer than rubber and sharpens the front end, but transmits more NVH. DuroBall removes deflection while still allowing the arm to articulate, making it the best pick for a daily-driven WRX. Full race bushings are stiffest and loudest.
Will stiffer bushings make my WRX ride harsh or noisy?
Stiffer bushings do add some noise, vibration, and harshness (NVH), but the amount depends on the material. SuperProβs DuroBall and standard polyurethane bushings keep a daily-driven WRX comfortable while sharpening steering. Whitelineβs race anti-dive/caster kit is firmer by design and is better suited to cars that see track days. Most street owners find the handling gain well worth the slight increase in road feel.
Do I need an alignment after installing new control arm bushings?
Yes β a wheel alignment is required after any control-arm bushing change on the WRX or STI. Replacing these bushings shifts caster, camber, and toe, and offset and anti-lift kits intentionally add caster. Skipping the alignment will cause uneven tire wear and mask the handling improvement. Budget for an alignment the same day and specify whether you want factory geometry or added caster.
Sharpen Your Subaruβs Front End
Shop Whiteline, Cobb, and SuperPro bushings β plus coilovers, sway bars, and arms β for the 2015-2021 WRX & STI at NLP Performance.
Shop SuspensionFree shipping on select brands β’ Located in Tampa, FL