Next Level Performance
June 29, 2026 • 11 min read
Choosing the right tonneau cover for your 2019–2023 Ford Ranger is the single most cost-effective upgrade you can make to a mid-size truck bed — it improves fuel economy, locks your cargo away from prying eyes, and keeps Florida thunderstorms out of your gear. The fourth-generation Ranger (chassis code P375, powered by the 2.3L EcoBoost making 270 hp and 310 lb-ft) ships with a 60.1-inch SuperCrew bed or a 72.8-inch SuperCab bed, and there is a cover engineered for exactly your configuration. Below, the team at NLP Performance compares six of the best Ford Ranger bed covers we stock — from a $137 soft roll-up to a fully enclosed fiberglass truck cap — with real specs, weight ratings, and prices so you can match the cover to how you actually use your truck.
Our Verdict
The BAK BAKFlip MX4 is the best all-around tonneau cover for the 2019–2023 Ford Ranger.
Its heavy-duty aluminum panels carry a 400 lb evenly distributed load, lock down for security, fold flat for full bed access in under a minute, and install in about 30 minutes with no drilling. If you want the maximum enclosed, weatherproof storage of an SUV-style cargo area, step up to the Westin EXP fiberglass truck cap; if budget rules the day, the Access TonnoSport roll-up delivers solid weather protection for $137.38.
Shop Our Top Pick →Quick Answer: The Best 2019–2023 Ford Ranger Bed Covers
The best tonneau cover for a 2019–2023 Ford Ranger depends on your priority: security, price, or full enclosed storage. For the best balance of all three, the BAK BAKFlip MX4 hard-folding cover wins. For maximum security and rack compatibility, the Retrax RetraxPRO XR retractable cover is unbeatable. For an enclosed, cap-height cargo box, the Westin EXP truck cap is the only option here that fully encloses the bed. The table below ranks all six by cover type, security level, and price (all prices reflect the SuperCrew 5-foot bed).
| Cover | Type | Security | Best For | Price |
|---|---|---|---|---|
| Access TonnoSport Roll-Up | Soft roll-up (vinyl) | Low | Budget / daily use | $137.38 |
| Extang Trifecta 2.0 | Soft tri-fold | Low–Medium | Quick bed access | $350.31 |
| TruXedo Pro X15 | Soft roll-up (low-profile) | Low–Medium | Sleek factory look | $629.99 |
| BAK BAKFlip MX4Top Pick | Hard tri-fold (aluminum) | High | Best all-around | $1,199.99 |
| Westin EXP Truck Cap | Fiberglass cap | Highest | Enclosed cargo room | $1,213.99 |
| Retrax RetraxPRO XR | Retractable (aluminum) | Highest | Security + rack rails | $2,249.99 |
Tonneau Cover Types Explained: Which Is Right for Your Ranger?
A tonneau cover is a bed cover that mounts to the rails of a pickup to protect cargo and reduce aerodynamic drag. There are five families to know before you buy for a 2019–2023 Ranger, and each trades security against price and convenience.
Soft roll-up covers
Soft roll-up covers use a vinyl or canvas tarp over an aluminum frame. They are the lightest and cheapest option, install in 20–30 minutes with no drilling, and roll to the cab in seconds for full bed access. The trade-off is security: the fabric can be cut, so they protect against weather and casual theft, not determined thieves. The Access TonnoSport ($137.38) and TruXedo Pro X15 ($629.99) are both roll-ups.
Soft and hard folding covers
Folding (tri-fold) covers hinge in thirds. Soft tri-folds like the Extang Trifecta 2.0 ($350.31) keep weight and cost down while adding rigidity over a roll-up. Hard tri-folds like the BAK BAKFlip MX4 ($1,199.99) use aluminum panels that lock shut, support a 400 lb evenly distributed load, and resist UV and impacts — the best balance of security, looks, and access for most Ranger owners.
Retractable and full truck caps
Retractable covers (the Retrax RetraxPRO XR, $2,249.99) roll into a sealed canister behind the cab on aluminum slats and lock at any point, offering the highest security of any flush cover. A fiberglass truck cap (the Westin EXP, $1,213.99 for the top section) is a different animal entirely: it builds an enclosed, cab-height cargo box on top of your bed, turning the Ranger into a lockable, weatherproof mini-SUV for tools or camping gear.
Hard tri-fold covers like the BAKFlip MX4 fold flat against the cab for full bed access.
Best All-Around: BAK BAKFlip MX4 Hard Folding Cover
The BAKFlip MX4 is the best overall tonneau cover for the 2019–2023 Ford Ranger because it combines hard-cover security with soft-cover convenience. Heavy-duty matte-finish aluminum panels lock to the bed rails yet fold up in thirds and prop against the cab, giving you full bed access in seconds. It carries a 400 lb evenly distributed load rating, installs in roughly 30 minutes with bolt-on clamps (no drilling), is assembled in the USA, and is backed by a 5-year warranty.
Key Specifications
What We Like
- + Locks down for high security yet folds for full bed access
- + 400 lb evenly distributed load rating on the closed panels
- + Clean matte finish; bolt-on install in about 30 minutes
Things to Consider
- – Heavier than soft covers and a bigger up-front spend
- – Folded stack blocks a few inches of bed-rail clearance near the cab
Best Budget Cover: Access TonnoSport Soft Roll-Up
The Access TonnoSport is the best budget tonneau cover for the 2019–2023 Ford Ranger at $137.38 — down from a $462.00 MSRP. This vinyl soft roll-up uses Access's AutoLatch hook-and-loop sealing system to keep weather out, mounts with no drilling in under 30 minutes, and rolls forward in seconds when you need the full 60.1-inch bed. It will not stop a determined thief, but for daily weather protection and a cleaner highway profile, nothing here costs less.
Want a soft cover with a slightly thicker tarp and a matte black grain? The Lund Genesis Roll-Up ($267.66) is a solid step up that still installs in minutes and fits the 19–23 Ranger 5ft bed.
Best Low-Profile Soft Cover: TruXedo Pro X15
The TruXedo Pro X15 is the best-looking soft roll-up for the 2019–2023 Ranger because its 15-degree side rails sit the cover nearly flush with the bed caps — roughly 33% lower than TruXedo's own Lo Pro. The half-inch canvas keeps the factory body lines intact, reduces wind flapping and noise, and has been tested from -40°F to 180°F and up to 95% humidity. It clamps on with no drilling and carries a limited lifetime warranty, making it the pick for owners who want a roll-up that disappears into the truck's design.
Most Secure Flush Cover: Retrax RetraxPRO XR
The Retrax RetraxPRO XR is the most secure flush bed cover for the 2019–2023 Ford Ranger. Its double-wall aluminum slats retract into a sealed canister behind the cab on sealed ball-bearing rollers, and the key-lockable TraxLatch handle locks the cover at any point along the bed — fully closed, fully open, or anywhere between. The slats support up to 500 lb, and the integrated T-slot Trax Rail System accepts most aftermarket bed racks, bike mounts, and tie-downs. It installs in under 60 minutes and is assembled in Grand Forks, North Dakota.
Soft roll-ups like the Pro X15 stow at the cab for unobstructed loading.
Best Full Enclosure: Westin EXP Fiberglass Truck Cap
If you want to turn your Ranger's bed into a fully enclosed, lockable, weatherproof cargo box, the Westin EXP truck cap is the only option on this list that does it. Unlike a flush tonneau, the EXP builds a color-matched black fiberglass shell with cab-height clearance over the 5-foot SuperCrew bed — ideal for hauling tools, camping gear, or anything that needs to stay dry and out of sight. The EXP is a modular system: the product priced here at $1,213.99 (down from $1,517.50) is the truck-cap top section, with the matching sides and hardware available separately, and a complete kit offered for a full build.
What We Like
- + Fully enclosed, lockable, weatherproof cargo space
- + Color-matched black fiberglass for a factory-style look
- + Modular EXP design lets you build the configuration you need
Things to Consider
- – Listed price covers the top section only; sides and hardware add cost
- – Adds height and weight; not a flush, low-profile look
Best Soft Tri-Fold Alternative: Extang Trifecta 2.0
The Extang Trifecta 2.0 ($350.31) is the smart middle ground between a budget roll-up and a premium hard cover. As a soft tri-fold, it adds rigidity and a cleaner closed look over a roll-up while staying light and easy to operate with one hand. The premium matte leather-grain vinyl resists UV fade, and the cover folds in thirds to clear most of the 5-foot bed in seconds — then lifts off entirely with quick-release clamps when you need to haul something tall. For owners who open the bed daily but want better fit and finish than the cheapest option, the Trifecta 2.0 is the value sweet spot.
The Extang Trifecta 2.0 soft tri-fold balances price, looks, and quick access.
The Lund Genesis roll-up is a budget-friendly soft alternative.
How to Choose the Right Ranger Bed Cover
Match the cover to your top priority. If you store valuables or tools, choose a hard cover that locks — the BAKFlip MX4 or, for maximum security and rack mounting, the Retrax RetraxPRO XR. If you mostly need weather protection on a budget, a soft roll-up like the Access TonnoSport does the job for the least money. If you frequently haul tall, bulky, or weather-sensitive loads and want them fully enclosed, the Westin EXP truck cap is the only choice here that encloses the bed. Finally, confirm your bed length first: the SuperCrew runs a 60.1-inch (5ft) bed and the SuperCab a 72.8-inch (6ft) bed, and every cover is sold to a specific length.
Frequently Asked Questions
What is the best tonneau cover for a 2019–2023 Ford Ranger?
The BAK BAKFlip MX4 ($1,199.99) is the best all-around tonneau cover for the 2019–2023 Ford Ranger. Its aluminum hard-folding panels lock for security, carry a 400 lb evenly distributed load, fold flat for full bed access, and install in about 30 minutes. For the lowest price, the Access TonnoSport roll-up ($137.38) is the best budget pick.
Do tonneau covers improve gas mileage on the Ranger?
Yes, a tonneau cover can modestly improve highway fuel economy by smoothing airflow over the open bed and reducing drag. Real-world gains are typically in the low single-digit percent range and are largest at sustained highway speeds. A flush, sealed cover such as a hard-folding or retractable model captures more of that benefit than a loose soft cover.
Will a 2019 Ford Ranger tonneau cover fit a 2020, 2021, 2022, or 2023 Ranger?
Yes. The 2019–2023 Ford Ranger is one generation (chassis code P375) with an unchanged bed, so a cover listed for a 2019 5-foot bed fits 2020, 2021, 2022, and 2023 5-foot SuperCrew beds. Always match the bed length — 5ft SuperCrew or 6ft SuperCab — rather than just the model year.
Are hard or soft tonneau covers more secure?
Hard tonneau covers are far more secure than soft covers. Soft vinyl covers can be cut or peeled back, so they deter only casual theft, while hard aluminum covers like the BAKFlip MX4 and retractable covers like the Retrax RetraxPRO XR lock shut and resist forced entry. For the most secure setup, a locking hard cover or a fully enclosed truck cap is the way to go.
How long does it take to install a Ranger tonneau cover?
Most Ford Ranger tonneau covers install in 20 to 60 minutes with no drilling. Soft roll-ups and folding covers clamp to the bed rails in 20–30 minutes, the BAKFlip MX4 takes about 30 minutes, and the retractable Retrax RetraxPRO XR takes under 60 minutes. A truck cap like the Westin EXP takes longer and is best installed with a helper because of its size and weight.
What bed length does the 2019–2023 Ford Ranger have?
The 2019–2023 Ford Ranger SuperCrew has a 60.1-inch (5-foot) bed, while the SuperCab has a 72.8-inch (6-foot) bed. The SuperCrew 5-foot bed is the most common configuration, which is why most covers — including all six in this guide — are listed for the 5ft bed.
Cover Your Ranger Bed the Right Way
Shop tonneau covers, truck caps, and bed accessories for the 2019–2023 Ford Ranger and thousands more parts at NLP Performance.
Shop Tonneau CoversFree shipping on select brands • Located in Tampa, FL
