Next Level Performance
November 14, 2026 • 9 min read
Our Verdict
For a 2020-2024 Jeep Gladiator JT winter build, the fifteen52 Turbomac HD is the wheel to run. For a cheaper set that still clears snow, the Dirty Life Canyon Pro wins on value.
Both are true 17-inch wheels with the Gladiator's native 5x127 bolt pattern and 71.5mm hub-centric bore, so they bolt on without adapters and leave room for a taller snow tire. The Turbomac HD is the lighter, cleaner premium pick (around $320 per wheel); the Canyon Pro delivers an aggressive 17x9 stance for roughly $240 per wheel.
Shop Our Top Pick →The best winter wheels for a 2020-2024 Jeep Gladiator JT are 17-inch cast alloys in the factory 5x127 bolt pattern and 71.5mm bore — and the two that come up most in our Tampa shop are the fifteen52 Turbomac HD and the Dirty Life Canyon Pro. Dropping from the Gladiator's stock 18-inch or 20-inch rims to a 17 is the single smartest cold-weather move you can make: it lets you run a taller, softer snow-tire sidewall that bites into slush and ice, shrugs off pothole and frozen-rut impacts, and takes a cheaper dedicated winter tire you can swap on and off every season. This head-to-head compares both wheels on fitment, weight, stance, and price, with two budget sets thrown in so there is a JT winter wheel here for every build.
Why run 17-inch wheels on a Gladiator in winter?
A 17-inch wheel is the winter sweet spot for the JT Gladiator because it frees up sidewall for a deeper-biting snow tire while clearing the truck's front brakes. The Gladiator left the factory on 17x7.5-inch (Sport) up to 18-inch (Overland) and 20-inch (some trims) wheels, all on a 5x127 (5x5-inch) bolt circle with a 71.5mm hub-centric bore. A 17-inch wheel is the smallest diameter that fits over the JT's brake calipers, and the smaller the wheel, the taller the tire sidewall for a given overall diameter — and sidewall is traction in the snow.
Real numbers tell the story. On a 17-inch wheel you can mount a 33x12.50R17 or a metric 285/70R17 winter tire with roughly 9 inches of sidewall; the same 33-inch overall diameter on a 20-inch wheel leaves barely 6.5 inches. That extra rubber lets you air down for flotation in deep snow, soaks up frozen washboard roads, and protects the rim from bent lips when you drop into an ice-hidden pothole. A 17-inch winter wheel also costs less and takes a cheaper tire than a 20, so a seasonal swap set does not break the bank.
fifteen52 Turbomac HD vs Dirty Life Canyon Pro: the quick comparison
The fifteen52 Turbomac HD and Dirty Life Canyon Pro are both one-piece cast 17-inch wheels built for the Gladiator's 5x127 / 71.5mm pattern, so the decision comes down to weight, stance, and budget. The Turbomac HD is a lighter 17x8.5 with a flush 0mm offset and a rally-bred motorsport look; the Canyon Pro is a wider, more aggressive 17x9 with a -12mm offset and a simulated-beadlock lip that pushes the tire out for a planted, poke-out stance. Below are the four JT winter wheels we stock most, from premium to budget.
| Wheel | Size & Offset | Bolt Pattern / Bore | Best For | Price |
|---|---|---|---|---|
| fifteen52 Turbomac HDTop Pick | 17x8.5, 0mm | 5x127 / 71.5mm | Lightweight overland | $322.92 |
| ICON Alpha | 17x8.5, 0mm | 5x127 / 71.5mm | Clean premium look | $311.30 |
| Dirty Life Canyon Pro | 17x9, -12mm | 5x127 / 71.5mm | Aggressive stance (value) | $240.00 |
| ION Type 171 | 17x9, 0mm | 5x127 / 83.82mm | Lowest price (add hub rings) | $167.44 |
The premium picks: fifteen52 Turbomac HD and ICON Alpha
The fifteen52 Turbomac HD is our top winter wheel for the Gladiator JT because it pairs a true off-road build with the lowest weight in this group. It is a one-piece cast alloy rated at 2,500 lb per wheel — well above the roughly 1,600 lb each corner of a loaded Gladiator Rubicon needs — with a hub-centric 71.5mm bore that locates dead-center on the JT's hub so there is zero steering-wheel shimmy. The 17x8.5 width and flush 0mm offset keep the tire tucked under the factory flares for a clean, rally-inspired look, and the matte Asphalt Black finish hides brake dust and road salt all season. It is currently on clearance, so a set of four lands around $1,290 before tires.
The Turbomac HD's 0mm offset tucks a 33-inch snow tire neatly under the JT's flares.
Key Specifications — fifteen52 Turbomac HD
What We Like
- + Lightest wheel here, so steering and acceleration stay crisp on snow tires
- + True hub-centric 71.5mm bore — no adapter rings, no shimmy
- + Matte Asphalt Black finish hides salt and brake dust
Things to Consider
- – Priciest option in this comparison
- – 8.5-inch width is less aggressive than the 17x9 options for a poke-out stance
If you want the premium build with a simpler, OE-plus face, the ICON Alpha is the pick. It matches the Turbomac HD on the important numbers — 17x8.5, 0mm offset, true 71.5mm hub bore — but trades the rally spokes for a clean five-spoke in Satin Black with 4.75 inches of backspacing. At around $310 per wheel with an extra discount running, it is a few dollars less than the fifteen52 and a strong choice if you also run an ICON lift or shocks and want the brand to match underneath.
The ICON Alpha's five-spoke face keeps a factory-plus look under salt and slush.
The value picks: Dirty Life Canyon Pro and ION Type 171
The Dirty Life Canyon Pro is the value winner for a Gladiator snow build. It is a 17x9 cast wheel on the correct 5x127 pattern with a true 71.5mm hub bore, so like the premium pair it bolts on with no rings. The -12mm offset and simulated-beadlock outer lip push the tire about an inch and a half wider per side for an aggressive, planted stance that looks the part under the JT's flares. To be clear, this is a beadlock-STYLE wheel — the ring is cosmetic, not a functional bead-locking clamp — but at roughly $240 per wheel (a set of four around $960), it is the cheapest way to get a wide 17 on your Gladiator for winter.
What We Like
- + Lowest cost per set of the true hub-centric 17s
- + Wide 17x9 with a -12mm offset for an aggressive winter stance
- + Correct 71.5mm bore — no adapter rings needed
Things to Consider
- – Simulated beadlock is cosmetic, not a real bead-locking ring
- – The -12mm offset pushes spray wider — run full flares and mud flaps
For the absolute lowest price, the ION Type 171 gets a set of four 17-inch winter wheels under your Gladiator for around $670. It is the same 5x127 bolt pattern and a 17x9 width, but note the one catch: its center bore is 83.82mm, bigger than the JT's 71.5mm hub. That means it is lug-centric out of the box, so you should add a set of 83.82-to-71.5mm hub-centric rings (a few dollars) to center the wheels and eliminate vibration. Do that and the polished Type 171 is a perfectly good dedicated snow-tire wheel — and if the polished lip gets pitted by salt over a few winters, you have not lost much.
The Canyon Pro's simulated-beadlock lip gives the JT a planted, aggressive winter stance.
A true 71.5mm hub-centric bore centers the wheel on the Gladiator's hub for a shimmy-free bolt-on.
Will these wheels fit my Gladiator JT?
Yes — every wheel here is built for the 2020-2024 Jeep Gladiator JT's factory 5x127 (5x5-inch) bolt pattern. The Gladiator uses M14 x 1.5 lug nuts torqued to about 130 ft-lb, and a 71.5mm hub-centric bore. The fifteen52 Turbomac HD, ICON Alpha, and Dirty Life Canyon Pro all have that exact 71.5mm bore, so they are true bolt-on fitments with no vibration. The ION Type 171 has a larger 83.82mm bore and needs a set of 83.82-to-71.5mm hub-centric rings to center properly. Clearance is generous on a stock-to-mildly-lifted JT: a 17x8.5 at 0mm or a 17x9 at -12mm clears the factory suspension and brakes with a 33-inch tire; if you run a heavier aggressive setup, air-tools and a quick test-fit at full lock are always worth it.
What winter tire should I pair with a 17-inch wheel?
Pair a 17-inch Gladiator winter wheel with a 285/70R17 or 33x12.50R17 tire carrying the Three-Peak Mountain Snowflake (3PMSF) symbol. That rating certifies the tire met a minimum snow-traction standard, unlike an ordinary M+S all-terrain. Popular snow-rated choices in that size include dedicated winter and severe-snow all-terrains; the taller 17-inch sidewall (roughly 9 inches on a 33) lets you air down to 18-20 psi for flotation in deep snow and soaks up frozen ruts that would crack a low-profile 20-inch setup. Keep the overall diameter near 33 inches so your speedometer and ABS stay accurate, and store your summer or all-terrain set on the factory rims while the dedicated winter wheel-and-tire package does the cold-weather work.
A budget 17x9 like the ION Type 171 makes an inexpensive dedicated winter swap set.
Frequently Asked Questions
What is the best winter wheel for a 2020-2024 Jeep Gladiator JT?
The fifteen52 Turbomac HD (17x8.5, 0mm offset) is the best winter wheel for a 2020-2024 Jeep Gladiator JT. It is a lightweight one-piece cast wheel rated at 2,500 lb per corner with the JT's native 5x127 bolt pattern and 71.5mm hub-centric bore, so it bolts on without adapters and leaves room for a tall 33-inch snow tire. For a budget build, the Dirty Life Canyon Pro delivers the same fitment at around $240 per wheel.
What is the Jeep Gladiator JT bolt pattern and hub bore?
The 2020-2024 Jeep Gladiator JT uses a 5x127mm (5x5-inch) bolt pattern with a 71.5mm hub-centric center bore and M14 x 1.5 lug nuts torqued to roughly 130 ft-lb. Wheels with a 71.5mm bore bolt on directly; wheels with a larger bore, such as the ION Type 171 at 83.82mm, need hub-centric rings to center correctly and run vibration-free.
Why run smaller 17-inch wheels on a Gladiator for winter?
Smaller 17-inch wheels let you run a taller snow-tire sidewall for better traction, impact protection, and air-down flotation. A 33-inch tire on a 17-inch wheel has roughly 9 inches of sidewall versus about 6.5 inches on a 20-inch wheel. That extra rubber bites into snow and slush, absorbs frozen potholes, and costs less to buy as a dedicated seasonal set than a 20-inch package.
fifteen52 Turbomac HD or Dirty Life Canyon Pro — which should I buy?
Choose the fifteen52 Turbomac HD if you want the lightest, cleanest premium wheel (17x8.5, 0mm, around $320 each); choose the Dirty Life Canyon Pro if you want the lowest price and an aggressive wide stance (17x9, -12mm, around $240 each). Both share the correct 5x127 pattern and true 71.5mm hub bore, so both are genuine bolt-on fitments — the decision is budget and stance, not fitment.
Is the Dirty Life Canyon Pro a real beadlock wheel?
No. The Dirty Life Canyon Pro has a simulated (cosmetic) beadlock ring, not a functional bead-locking clamp, so you cannot air down below a tire's safe seated pressure as you could on a true beadlock. It gives the aggressive beadlock look at a fraction of the cost while still being a DOT-legal cast wheel with the correct Gladiator 5x127 / 71.5mm fitment.
What tire size fits a 17-inch Gladiator winter wheel?
A 285/70R17 or 33x12.50R17 tire fits a 17-inch Gladiator winter wheel and keeps overall diameter near the factory 33 inches. Choose a tire with the Three-Peak Mountain Snowflake (3PMSF) symbol for certified snow traction, and keep the diameter near stock so the JT's speedometer and ABS stay calibrated.
Build Your Gladiator for Winter
Shop fifteen52, ICON, Dirty Life, and dozens more off-road wheel brands for your 2020-2024 Jeep Gladiator JT at NLP Performance.
Shop Winter WheelsFree shipping on select brands • Located in Tampa, FL