Next Level Performance
August 30, 2026 • 9 min read
The HKS TYPE-S body kit is the most complete factory-engineered aero package you can bolt onto a 2022-2024 Toyota GR86 (chassis ZN8) or Subaru BRZ (ZD8). Where most GR86 lip kits are a single front splitter, HKS builds a matched three-piece set — front spoiler, side skirts and a fin-shaped rear under spoiler — that sharpens the car’s stance and actually manages airflow. In this review we break down what is in the kit, the materials, how it pairs with an HKS TYPE-S duck-tail spoiler and a Seibon carbon fiber hood, real fitment notes, and exactly what you should budget. Every part is in stock and ships from NLP Performance in Tampa, FL.
Our Verdict
The HKS TYPE-S Spoiler Set is the standout aero upgrade for the 2022-2024 GR86 and BRZ.
For around $5,390 you get a cohesive front-side-rear kit in paint-ready FRP with CFRP front barge panels — a genuine step above one-off splitters. Pair it with the TYPE-S duck-tail spoiler or a Seibon carbon hood to finish the look. Choose the standalone duck-tail or a carbon hood first if you want a lighter-budget entry point.
Shop Our Top Pick →What Is the HKS TYPE-S Body Kit for the GR86?
The HKS TYPE-S body kit (part number 53004-AT027) is a three-piece exterior aero set designed specifically for the 2022-2024 Toyota GR86. It is not a wing or a single splitter — it is a coordinated front spoiler, pair of side skirts, and a rear under spoiler that were styled and wind-developed together. HKS designed the front and rear pieces to work as a pair so the downforce balance stays neutral rather than loading one axle. On the 228-horsepower, rear-wheel-drive GR86 — a car that makes 184 lb-ft of torque from its 2.4L FA24 boxer and rewards mid-corner balance — that matched approach matters more than raw wing size.
The core panels are molded from FRP (fiber-reinforced plastic), the same paint-ready composite HKS uses across its aero line. The front spoiler adds CFRP (carbon fiber reinforced plastic) barge panels at each end plus an under panel, which stiffens the leading edge and gives the front a premium, layered finish once painted. Because the panels ship unpainted, plan on professional prep and paint to match your GR86’s factory color — that is normal for any high-end FRP body kit and is where a chunk of the total project cost lives.
Key Specifications
How Does the HKS TYPE-S Aero Actually Work?
Each of the three pieces has a job. The front spoiler uses an under panel and CFRP barge panels to rectify the air moving beneath the nose, reducing turbulent lift at the front axle and helping high-speed stability — useful on a light car that can feel nervous over 80 mph on track. The side skirts carry a large barge panel on the fender that visually drops the car and keeps side airflow attached along the body, cleaning up flow before it reaches the rear. The rear under spoiler is a distinctive fin shape that organizes the air leaving the diffuser area and balances the downforce added up front, so the car stays planted without a giant chassis-mounted wing.
HKS TYPE-S front spoiler with CFRP barge panels and matched side skirt.
Visually, the payoff is a car that looks lower, wider and more purposeful without changing the GR86’s clean factory lines. This is the difference between a coordinated body kit and a bin of mismatched lips: because HKS developed the front and rear together, the finished car reads as a single design rather than a parts-catalog build. For most street and occasional-track GR86 owners in the Tampa area, that balance of looks and real aero function is exactly the target.
The fin-shaped rear under spoiler balances front downforce.
HKS TYPE-S Duck-Tail Spoiler: The Subtle Alternative
Not every GR86 owner wants the full three-piece treatment. The HKS TYPE-S Duck Tail Spoiler (part 53004-AT025) is a standalone rear trunk spoiler that fits 2022-2024 GR86 and BRZ models. It clips onto the trailing edge of the decklid for a classic duck-tail silhouette — a subtle lift kick that adds attitude and a touch of rear stability without a tall wing. At around $1,760 it is the easiest way to get an HKS TYPE-S signature onto the car, and it layers perfectly with a carbon hood if you are building the look in stages.
The full HKS TYPE-S kit gives the GR86 a lower, wider stance.
Seibon Carbon Fiber Hoods: TS-Style vs FA-Style
To finish the front end, a Seibon carbon fiber hood is the classic pairing. Seibon offers several styles for the 2022+ GR86/BRZ, and two of the most popular are the TS-Style (part HD22TY86-TS) and the FA-Style (part HD22TY86-FA), each around $1,440. Both are hand-laid carbon fiber with a UV-protective clear coat and OE-style mounting, so they bolt to the factory hinges and latch with no fabrication.
One honest note our Tampa install team always shares: on the ZN8/ZD8 platform, a carbon hood is not a big weight-loss mod. The factory GR86/BRZ hood is already very light, so the real reasons to run a Seibon carbon hood are the aggressive styling and, on vented designs, extra engine-bay heat extraction that helps on track days. If your goal is pure weight reduction, spend elsewhere; if you want the carbon look and better hot-air venting to match the HKS aero, these hoods deliver.
Seibon TS-Style hood in hand-laid carbon with clear coat.
The FA-Style adds a more aggressive, race-inspired hood surface.
HKS and Seibon GR86 Aero Compared
| Kit | Role | Material | Fits | Price |
|---|---|---|---|---|
| HKS TYPE-S Spoiler SetTop Pick | Front + side + rear aero | FRP + CFRP panels | 2022-2024 GR86 | $5,390.00 |
| HKS TYPE-S Duck Tail Spoiler | Rear trunk spoiler | Paint-ready composite | 2022-2024 GR86 / BRZ | $1,760.00 |
| Seibon TS-Style Carbon Hood | Carbon hood (TS) | Carbon fiber | 2022-2026 GR86 / BRZ | $1,440.00 |
| Seibon FA-Style Carbon Hood | Carbon hood (FA) | Carbon fiber | 2022-2027 GR86 | $1,440.00 |
HKS TYPE-S Body Kit: Pros and Cons
What We Like
- + Matched three-piece design keeps the front-to-rear aero balance neutral
- + Premium FRP with CFRP front barge panels; paints to an OEM-quality finish
- + Bolt-on to factory mount points — no chassis cutting
- + Developed by HKS specifically for the ZN8 GR86
Things to Consider
- – Ships unpainted — budget for professional prep and paint
- – Premium price versus a single front lip
- – Low front spoiler needs care on steep driveways and ramps
Installation, Paint and Fitment Notes
All four parts here are designed as bolt-on or adhesive-and-bolt installs that use the GR86’s factory mounting points, so no chassis modification is required. That said, a body kit at this level is only as good as its prep. The HKS FRP panels should be test-fit, prepped, primed and painted before final installation — rushing the paint is the number-one way owners end up with mismatched panels. The Seibon carbon hoods bolt to the OEM hinges and use the factory latch; on many carbon hoods you will want aftermarket hood pins for track use, and you should re-check gaps after the first few heat cycles.
Plan realistic timing: paint and body work on a full kit typically takes a professional shop several days, and we always recommend a proper alignment of panel gaps before you call it finished. If you are staging the build, a smart order is duck-tail or carbon hood first, then the full HKS TYPE-S Spoiler Set once you are ready for paint. Browse the complete exterior and aero collection at NLP Performance to match brackets, hardware and finishing touches.
Frequently Asked Questions
Does the HKS TYPE-S body kit fit the 2022-2024 Toyota GR86 and Subaru BRZ?
Yes. The HKS TYPE-S Spoiler Set (part 53004-AT027) is engineered for the 2022-2024 Toyota GR86 (chassis ZN8), and HKS builds a matching TYPE-S kit for the 2022+ Subaru BRZ (ZD8). It bolts to factory mounting points, so no cutting is required. The TYPE-S Duck Tail Spoiler (53004-AT025) is listed to fit both the GR86 and BRZ.
What is the HKS TYPE-S body kit made of?
The HKS TYPE-S body kit is molded from FRP (fiber-reinforced plastic), a paint-ready composite, with CFRP (carbon fiber reinforced plastic) barge panels added to each end of the front spoiler for rigidity and a premium finish. The panels ship unpainted and must be prepped and painted to match your car's color.
Does the HKS TYPE-S body kit add downforce?
Yes, modestly. The front spoiler's under panel and barge panels rectify airflow beneath the nose to cut front-end lift, the side skirts keep side airflow attached, and the fin-shaped rear under spoiler balances the rear. HKS developed the front and rear pieces together so downforce stays balanced front to rear rather than loading one axle.
Do Seibon carbon fiber hoods save weight on the GR86 or BRZ?
Not significantly. The factory hood on the 2022+ GR86/BRZ is already very light, so a Seibon carbon fiber hood is chosen mainly for its aggressive styling and, on vented designs, extra engine-bay heat extraction rather than major weight loss. If weight reduction is your only goal, other mods deliver more.
How much does the HKS TYPE-S GR86 body kit cost?
At NLP Performance the HKS TYPE-S Spoiler Set runs around $5,390, the HKS TYPE-S Duck Tail Spoiler is around $1,760, and Seibon TS-Style or FA-Style carbon fiber hoods are around $1,440 each. Remember to budget separately for professional prep and paint on the FRP body kit panels.
Can I install the HKS body kit myself?
The kit is a bolt-on design that uses factory mount points, so a skilled DIYer can fit the panels. However, because the FRP pieces ship unpainted and require careful prep, paint and gap alignment for a clean result, most GR86 owners have a body shop handle the paint and final fitment.
Build Your GR86 the Right Way
Shop the HKS TYPE-S body kit, duck-tail spoiler and Seibon carbon hoods, plus thousands more performance parts at NLP Performance.
Shop the CollectionFree shipping on select brands • Located in Tampa, FL