The Ford Bronco has a tendency to have bump steer (especially when adding heavier, larger, wider tires and wheel combinations). That steering wheel kick / steering wheel shimmy you feel is bump steer (up thrust bumps, nosedive dips, rolling ruts and side-to-side kicks from the terrain). Skyjacker(R) steering stabilizers are dampening shocks for your steering system. They dampen out the harshness of the highway and place control back into the driver's hands. Controlling the terrain helps reduce the physical fatigue of fighting the road. Improves steering response time and allows you to enjoy the drive. CNC machined 6061-T6 polished aluminum hard anodized body cylinder ADX 2.0 stabilizers with 30mm bore & 14mm piston rod provide specific valving needed with equal compression and extension damping performance. The dampening control also adds life to tires, tie rod, ball joints and other steering components. CNC machined 6061-T6 polished aluminum hard anodized body and caps for superior rust resistance. CNC machined 6061-T6 polished aluminum hard anodized body dissipates heat up to 30% faster than traditional steel body steering stabilizers. Internal high performance fade resistant gas cell yields longer life, improves handling, & performance. Compatible with stock to 7 in. lift heights. Includes two (2) steering stabilizers, mounting brackets and required hardware. Easy DIY bolt-on installation.
ADX 2.0 DUAL STABILIZER KIT
- Aluminum Body Dissipates Heat Up To 30 Percent Faster Than Steel Body
- Delivers A Quicker Response To Terrain And Improved Handling
- CNC Machined 6061-T6 Polished Aluminum Hard Anodized
- Gain A More Controlled Handling Feel On And Off-Road
- Decreases Tire. Tie Rod And Ball Joint Wear And Tear
- Restrains Bump Steer. Reduces Steering Wheel Shimmy
- Internal High Performance Fade Resistant Gas Cell
- Specific Valving To Improve Control And Handling
- Equal Compression/Extension Damping Performance
- No Lift Required. Easy DIY Bolt-On Installation
- For Stock And Lifted Bronco 4WD
- 30mm Bore/14mm Piston Rod
|
| Air Freight Prohibited: false |
| Not Carb Approved: false |
| Carb Acknowledgement Required: false |
| Ltl Freight Required: false |
| Prop 65: Y |
| Part Type: automotive |
| Epa: N/A |
| Regular Stock: t |
Vehicle Fitment
| Years |
Make |
Model |
Trim |
| 1966–1977 |
Ford |
Bronco |
|
