PRP's Stock Seat Mount & Slider Kit for Can-Am Maverick X3 and Maverick R (Pair) - PRP's Stock Seat Mount and Slider Kit for the Can-Am Maverick X3 and Maverick R allow you adjust your stock seats more than ever before. This mount is an entire new rail system with more height adjustments, and includes our dual locking seat sliders. A common complaint on the X3 is that the seat sliders start to get stuck after dirt and dust gets into the wheels. So we've added in our own slider kit that has been tried, tested, and proven over the last 20 years in all sorts of off-road environments. Our dual locking sliders provide more security and stability. Both the right and left sides of the sliders have locking mechanisms to keep them in place during hard impacts. These seat mounts allow for an enhanced range of adjustability, allowing the seats to get as low as they can possibly go. You have the ability to set the height and depth of the mounts to get the perfect position for each rider. Creating better comfort, and confidence behind the wheel. The flat base mounts are lower than the stock rails, and have an offset mounting point in the front. So you can flip the mounts down if you want to be lowered an inch, or flip them up if you want to raise the seat height an inch. The mounts use the existing mounting points in the cab, which allow you to raise or lower the seat in the front and back to adjust the seating angle. At the lowest settings with the mounts flipped down, you can sit about 3" lower. This mount is perfect for those with lowered cages. For Maverick R owners this the only mount that we recommend using. The passenger side of the Maverick R has a glove compartment that sticks out farther, making it harder for taller passengers to fit comfortably. This seat mount and slider kit allows you to adjust seat farther back, and adjust the recline angle to get more legroom on the passenger side. Compatibility: These mounts work with the Front OEM/Stock Seats for the

Vehicle Fitment